Windshield Wiper System, Installing

Windshield Wiper System

Windshield Wiper System, Installing

Procedure

- Install wiper frame in reverse sequence. While installing, securing pin - 2 - of wiper frame must be inserted into grommet - 1 - on bulkhead.





- Tighten all threaded connections to the specified values. Refer to --> [ Windshield Washer System Tightening Specifications ] [1][2]Specifications.

- Connect the connector to the Windshield Wiper Motor (V) connection and engage it.

- Install air duct trim and plenum chamber cover in reverse order.

- Install plenum chamber cover. Refer to --> [ Plenum Chamber Cover ]. Plenum Chamber Cover

- Reconnect battery. Refer to --> [ Battery, Disconnecting and Connecting ] .

- Install windshield wiper arms. Refer to --> [ Windshield Wiper Arms ] Windshield Wiper Arms.