New Window, Preparing For Glazing

Flush Bonded Windows

New Window, Preparing for Glazing

Ceramic coating is only still applied on all new windows and sprayed on sealing lips with spacer.

Exception: Rear window has no sealing lip and no spacer.





1 Sealing lip
2 Spacer
3 Window

• The application area for adhesive bead 3 is not pre-coated and not primed.

- Clean window circumference to width of 20 mm all around using cleaning solution (D 009 401 04).

- Then rub window circumference dry using a lint-free rag.

CAUTION!
Ceramic application on window is not primer! It must be primed before the application of adhesive sealing material! Only use primer (D 009 200 02)!

- Now apply primer - 4 - using applicator (D 009 500 25) - 3 - evenly in one stroke on the previously cleaned area of the window - 1 -.





Make sure that glass adhesive is applied to primed area at a distance of approx. 2 mm from sealing lip - 2 -.

Air dry time approx. 10 minutes