Shift Forks, Servicing

Shift Forks, Servicing

Special tools, testers and auxiliary items required

• Thrust plate (VW 402)

• Punch (VW 411)

• Tube trans. drive shaft (VW426)

• Thrust pad 16.5/28 mm dia. (VW431)

• Internal extractor (Kukko 21/3)

• Support (Kukko 22/1)





1 Rubber damper

• Can be pulled out of selector rod and inserted by hand

2 Selector rod with shift fork for 1st and 2nd gear

3 Selector rod with shift fork for 3rd and 4th gear

4 Selector rod with shift fork for 5th and 6th gear

5 Reverse gear shift fork

6 Ball sleeve

• Pulling out --> [ Pulling Off Ball Sleeve for Reverse Gear Shift Fork ]

• Pressing in --> [ Pressing In Ball Sleeve for Reverse Gear Shift Fork ]

Pulling Off Ball Sleeve for Reverse Gear Shift Fork





A Internal puller 18 to 23 mm, e.g. (Kukko 21/3)
B Support, e.g. (Kukko 22/1)

Pressing In Ball Sleeve for Reverse Gear Shift Fork