Procedures

Selector Lever Cable, Checking

Short description

To check selector lever cable for ease of movement, selector lever cable must be removed from transmission and removed end must be set aside so that it does not make contact anywhere.

Selector lever is then moved and cable is reinstalled at transmission.

Selector lever cable must be adjusted --> [ Selector Lever Cable, Adjusting ] Adjustments.

Do not grease cable connection!

Checking

- Place selector lever in position P.

- Remove cable from lever on transmission.

- Move selector lever from P to S and back to P several times.

• Selector lever must move without resistance when doing this.

- Reinstall cable with new lock washers and loosened adjustment screw.

- Adjust cable --> [ Selector Lever Cable, Adjusting ] Adjustments.