Tire Pressure Sensor Assembly Overview

Tire Pressure Sensor Assembly Overview





1 Tire pressure sensor

• Supplied as a complete replacement part.

• Removing and installing, refer to --> [ Tire Pressure Sensor ] Tire Pressure Sensor.

• When battery is discharged, the entire tire pressure sensor must be replaced

• After using a wheel repair kit, the bore for the valve and opening of the pressure sensor must be wiped clean.

2 Valve stem core

• Replace at every tire change

• Use only original manufacturer's valve stem core, it has a special coating!

3 Sealing washer

4 Seal

5 Wheel

• Mounting tires (with tire pressure monitoring system), refer to --> [ Tire, with Tire Pressure Monitoring System ] Tire, with Tire Pressure Monitoring System.

• Mounting tires (with run flat tires), refer to --> [ Tire, with Run-Flat Tires ] Tire, with Run-Flat Tires.

6 Union nut, 8 Nm

7 Valve cap

• Use only original valve caps from the repair set.

• Do not use comfort valve caps or metal caps.