Steering Mounted Controls Communication Module: Service and Repair

Multifunction Steering Wheel Control Module

Removing

CAUTION!
• Special safety precautions apply to vehicles equipped with airbags General Information.

• Electrostatically discharge yourself before working on the airbag unit. This can be accomplished by touching an grounded metal object such as a water pipe, heater pipe or metal support.

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

• Disconnect negative (-) battery terminal.

- Remove driver's airbag, Removal and Installation.

- Disconnect both electrical connections at control module.

- Using a suitable screwdriver, carefully pry out the control module - arrow -.





Installing

Install in reverse order of removal.

- Code control module for steering column electronics, --> [ Multifunction Steering Wheel, Adapting ]Testing and Inspection.