Relay Carrier with Fuse Holder

Relay Carrier with Fuse Holder

CAUTION!
When disconnecting and connecting the battery, the procedure must be followed as described in the Repair information. Refer to --> [ Battery, Disconnecting and Connecting ] .

Removing

- Disconnect the battery. Refer to --> [ Battery, Disconnecting and Connecting ] .

- Remove driver's storage compartment.

- Remove bolts - arrows - for bracket.





- Remove relays - arrows - from relay carrier.





• The number of relays is dependent on vehicle equipment.

- Clip retaining tabs in - direction of arrow - outward and then press connectors - 1 - through relay carrier.





- Release retainer - 1 - for relay panel in direction of - arrow - and remove relay panel.





Installing

Install in reverse order of removal, noting the following:

- First clip connector into relay carrier.

- Place relay carrier - 2 - into guide - 1 - and then engage relay carrier.