Left Instrument Panel Fuse Holder

Left Instrument Panel Fuse Holder

Special tools, testers and auxiliary items required

• Trim removal wedge (VAS 3409)

CAUTION!
When disconnecting and connecting the battery, the procedure must be followed as described in the Repair information. Refer to --> [ Battery, Disconnecting and Connecting ] .

CAUTION!
• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing

- Disconnect the battery. Refer to --> [ Battery, Disconnecting and Connecting ] .

- Remove driver's storage compartment..

- Remove the side instrument panel cover - 1 - by inserting the (VAS 3409) or a screwdriver into the opening - 2 - and prying the cover - 1 - off in the - direction of the arrow -.





- Remove fuse assignment card - 1 - from fuse panel - 2 -.





- Remove screws - arrows - and guide fuse panel - 1 - out toward inside, considering length of available cable.

Installing

Install in reverse order of removal.