Battery, Removing and Installing

Battery, Removing And Installing

Gasoline Engine

Special tools, testers and auxiliary items required







- Torque Wrench VAG 1331

Removing
- Disconnect battery.







- Lift battery box panel upward in direction of - arrow -.







- Remove screws - 1 - and remove retaining bracket - 2 -.







- Fold the handles - arrows - up and remove the battery.

Installing

CAUTION:
If the battery is not secured properly, the following risks are possible:
- Shortened battery service life due to vibration damage (explosion hazard).
- If the battery is not secured properly, the plates within the battery can be damaged.
- Damage to battery casing caused by bracket (possible electrolyte leakage, high subsequent costs).
- Reduced collision safety.

Install in reverse order of removal, noting the following:
- Tighten all fasteners to specified values.
- After installing, ensure the battery is seated properly.
- Connect battery.

CAUTION: When disconnecting and connecting the battery, the procedure must be followed as described.