Rear Window Switches

Rear Window Switches

The Left Rear Window Switch (In LR Door) (E52) and Right Rear Window Switch (In RR Door) (E54) are removed and installed the same way so the procedure is only described for one of them.

CAUTION!
• Turn off the ignition and all electrical consumers.

• Remove ignition key.

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing

- Remove the upper part of the handle shell from the pull handle.

- Disconnect electrical connection - arrow -.





- Release the retaining tabs - arrows - and remove the Left Rear Window Switch (In LR Door) from the installation frame.





Installing

Install in reverse order of removal.