Seat Occupied Recognition System Assembly Overview

Airbags

Seat Occupied Recognition System Assembly Overview





1 Front Seat Wiring Harness

2 Seat Frame

3 Seat Occupied Recognition Control Module (J706)

4 Upholstery of Front Seat Cushion

• Must not be separated from mat for seat occupied recognition

5 Passive Occupant Detection System Mat

• Must not be removed from pressure hose and upholstery of front seat cushion

6 Insertion Profile

• Note location

7 Bracket

• White

Seat Occupied Recognition System, Parts Repair Set

If there is a malfunction in one of the system components, it must be replaced the repair set specified by the data for the affected vehicle. This includes:

CAUTION!
Do not disconnect the individual parts of the seat occupied recognition repair set from each other.





1 Upholstery of Front Seat Cushion

2 Pressure Hose

3 Passive Occupant Detection System Mat

4 Seat Occupied Recognition Pressure Sensor (G452)

5 Seat Occupied Recognition Control Module (J706)

6 Front Seat Wiring Harness

7 Bracket

• White

CAUTION!
Read the instructions on the repair set packaging so it is used correctly. Incorrect handling can cause system malfunction.