Steering Column Switch Assembly Overview

Steering Column Switch Assembly Overview





1 Turn Signal Switch

• Removing and installing, refer to --> [ Turn Signal Switch ] Steering Column Switches.

• The "turn signal switch" consists of the Turn Signal Switch (E2)/Headlamp Dimmer/Flasher Switch (E4) and, depending on equipment, the Cruise Control Switch (E45).

• In the illustration, the "turn signal switch" is depicted without Cruise Control Switch (E45)

2 Base carrier for steering column switches

• Removing and installing, refer to --> [ Steering Column Switch Base Plate ] Steering Column Switches.

3 Windshield Wiper Switch (E)

• Removing and installing, refer to --> [ Windshield Wiper Switch ] Steering Column Switches.

4 Bolt

5 Steering Column Electronic Systems Control Module (J527)

• Removing and installing, refer to --> [ Steering Column Electronic Systems Control Module ] Steering Column Switches.

• Coding, refer to --> [ Steering Column Electronic Systems Control Module, Coding ] Programming and Relearning.

• Output Diagnostic Test Mode (DTM), refer to --> [ Steering Column Electronic Systems Control Module, Output Diagnostic
Test Mode ] Initial Inspection and Diagnostic Overview.

6 Airbag Spiral Spring/Return Spring With Slip Ring (F138)

• Removing and installing, refer to --> [ Airbag Spiral Spring/Return Spring With Slip Ring ] Steering Column Switches.

7 Steering Angle Sensor (G85)

• Removing and installing, refer to --> [ Steering Angle Sensor ] Steering Column Switches.

• Basic setting, refer to --> [ Steering Angle Sensor, Basic Setting ] Steering Angle Sensor, Basic Setting.