Evaporator Temperature Sensor / Switch: Service and Repair

Climatronic Temperature Sensors

--> [ Left Footwell Vent ]

--> [ Right Footwell Vent ]

--> [ Evaporator ]

--> [ Vent ]

Left Footwell Vent

Removing

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

- Remove instrument panel

- Remove screws --> [ (item 10) Screws ] Climatronic Heating and A/C Unit from bracket --> [ 11 Bracket ] Climatronic Heating and A/C Unit.

- Disconnect electrical connection at sensor - 1 -.





- Press bracket --> [ 11 Bracket ] Climatronic Heating and A/C Unit slightly toward left, rotate sensor - 1 - 90° and remove from housing.

Installing

Install in reverse order of removal.

Right Footwell Vent

Removing

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

• Right Footwell Vent Temperature Sensor (G262) is depicted with instrument panel removed. It is not necessary to remove instrument panel.

- Remove glove compartment.

- Disconnect electrical connection at sensor - 1 -.





- Rotate sensor - 1 - 90° and remove from housing.

Installing

Install in reverse order of removal.

Evaporator

Removing

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

- Remove front passenger's footwell cover - 1 -.





- Disconnect electrical connection at sensor - 1 -.





- Rotate sensor in direction of - arrow - and remove.

Vent

Removing

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

• Removal of sensors on both sides is identical, only the sides are reversed.

- Remove cover at left or right on instrument panel

- Disconnect electrical connection - 1 - from sensor - 2 -.





- Rotate sensor - 2 - 90° in direction of - arrow - and remove from instrument panel.

Installing

Install in reverse order of removal.