Front Seat Belt Latch

Seat Belts

Front Seat Belt Latch

• Removing and installing the left seat belt latch is described. The same instructions apply for removal and installation for seat belt latch of right seat.

Removing

- Remove front seat. Refer to => [ Front Seat ] Front Seat.

- Position seat into rearmost seat position.

- Disconnect wiring harness to seat frame seat belt latch.

- Remove cover cap from seat rails.

- Remove bolt - 1 - (20 Nm).

• Bolt is micro-encapsulated and must be replaced after each loosening.

• Before installing the new bolt, threads on nut must be cleaned, re-cut if necessary.

- Pull seat belt latch - 2 - out of mount in seat rail - arrow -.





Installing

To install, perform the steps used for removal in reverse order.