Taillamps, Wagon

Rear Lamps

Taillamps, Wagon

CAUTION!
• Turn off the ignition and all electrical consumers.

• Remove ignition key.

Removing

- Push aside the side trim panel.

- Disconnect connector - 3 -.





- Remove mounting nuts - 2 - and - 4 - on the taillamp - 1 -.

- Remove the taillamp - 1 -.

Installing

Install in reverse order of removal, noting the following:

- Tighten the mounting nuts - 2 - and - 4 - to the specified torque. Refer to --> [ Fastener Tightening Specifications ] [1][2]Lighting and Horns.





• The taillamp assembly connector must engage "audibly" when connecting.

- Check gap dimension to the body after installing the taillamp assembly - 1 -.