Front Illuminated Vanity Mirror Light

Roof Trim Lamps and Switches

Front Illuminated Vanity Mirror Light

The Front Passenger's Illuminated Vanity Mirror Light (W14)/Driver's Illuminated Vanity Mirror Light (W20) are removed and installed the same way so the procedure is only described for one of them.

Special tools, testers and auxiliary items required

• Trim removal wedge (VAS 3409)

CAUTION!
• Turn off the ignition and all electrical consumers.

• Remove ignition key.

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing

- Carefully pry the Front Passenger's Illuminated Vanity Mirror Light out of the roof trim using the (VAS 3409).





- Disconnect electrical connection - arrow -.





Bulb, replacing

- Press the Front Passenger's Illuminated Vanity Mirror Light contact plate - 1 - in the direction of the arrow and remove the soffit - 2 - from the socket.





- Replace bulb (12V, 5 W).

Installing

Install in reverse order of removal.