Diagram 6/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Coolant Temperature (ECT) Sensor, EGR Temperature Sensor, Intake Manifold Runner Position Sensor, Intake Flap Motor, Engine Control Module (ECM)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Locations [1][2]Camshaft Position Sensor

G62 - Engine Coolant Temperature (ECT) Sensor Locations Engine Coolant Temperature Sensor -G62-

G98 - EGR Temperature Sensor Locations [1][2]Diagrams

G336 - Intake Manifold Runner Position Sensor [1][2]Diagrams

J519 - Vehicle Electrical System Control Module Control Modules In Interior, From July 2007

J623 - Engine Control Module (ECM) Control Modules In Engine Compartment

T3q - 3-Pin Connector

T60 - 60-Pin Connector

V157 - Intake Flap Motor Locations [1][2]Diagrams

(282) - Ground Connection (in headlamp washer-system wiring harness)

(D35) - Plus Connection 1 (15a) (in engine pre-wiring wiring harness)

(D141) - Connection (5V) (in engine pre-wiring wiring harness)

Previous Diagram 6/12 (Tracks 141-154)

Next Diagram 6/14 (Tracks 169-182)