Parking Brake Lever: Service and Repair

Parking Brake Lever Assembly Overview





1 Parking brake lever

• Remove the center console before removing.

2 Nut, 20 Nm

3 Parking brake lever trim

• pull off forward.

• Pry off release tab in rear bottom handle area - arrow - with a screwdriver.

• With a leather version, leather in catch area is cut.

4 Relay rod

5 Compensator bracket

6 Adjustment nut

• Parking brake adjusting, refer to --> [ Parking Brake, Adjusting ] Adjustments.

7 Parking brake switch

8 Parking brake cables

• Removing and installing, through MY 2007, refer to --> [ Parking Brake Cables, through MY 2007 ] Service and Repair.

• Removing and installing, from MY 2008, refer to --> [ Parking Brake Cables, from MY 2008 ] Service and Repair.