ABS Mark 60 (ABS, EDL, ASR and ESP), From 07.06.08

Connecting Brake Lines from Master Cylinder to Hydraulic Unit

On the Master Cylinder





A Primary piston circuit of master cylinder to hydraulic unit
Identification: 6.5 mm diameter and fitting with M12 x 1 threads
B Secondary piston circuit of master cylinder to hydraulic unit
Identification: 6.5 mm diameter and fitting with M12 x 1 thread
1 Hydraulic unit to left front brake caliper
3 Hydraulic unit to right rear brake caliper
4 Hydraulic unit to left rear brake caliper

On the Hydraulic Unit





A Hydraulic unit to primary piston circuit of master cylinder
Identification: 6.5 mm diameter and fitting with M12 x 1 threads
B Hydraulic unit to secondary piston circuit of master cylinder
Identification: 6.5 mm diameter and fitting with M12 x 1 threads
1 Hydraulic unit to left front brake caliper
Identification: 5.25 mm diameter and fitting with M10 x 1 threads
2 Hydraulic unit to right front brake caliper
Identification: 5.25 mm diameter and fitting with M12 x 1 threads
3 Hydraulic unit to right rear brake caliper
Identification: 5.25 mm diameter and fitting with M10 x 1 threads
4 Hydraulic unit to left rear brake caliper
Identification: 5.25 mm diameter and fitting with M12 x 1 threads