Hydraulic Components

Brake Caliper Assembly Overview

• Install the complete repair kit when servicing.

• Only use mineral spirits to clean the brake parts.

• Apply thin coat of assembly paste (G 052 150 A2) to brake cylinders, pistons and seals.





1 - Dust cap

• Install onto bleeder screw.

2 - Bleeder screw, 10 Nm

• Apply a thin coat of assembly paste (G 052 150 A2) to the threads before installing.

3 - Caps

• Insert in bushing.

4 - Guide pins, 30 Nm

5 - Bushing

• Insert in brake caliper.

6 - Brake caliper

7 - Protective cap

• Removing and installing, refer to --> [ Brake Caliper Piston ] Brake Caliper Piston.

• Do not damage when installing piston.

8 - Piston

• Removing and installing, refer to --> [ Brake Caliper Piston ] Brake Caliper Piston.

• First apply a thin coat of assembly paste (G 052 150 A2) on the piston.

9 - Seal

• Removing and installing, refer to --> [ Brake Caliper Piston ] Brake Caliper Piston.