Seat Bench Cover and Upholstery, Wagon

Rear Seat Covers and Upholstery

Seat Bench Cover and Upholstery, Wagon

Removing

• The Trendline version is represented in the following description. The work is described for the right bench seat. The work is the same for the left side and other equipment versions.

- Remove seat bench. Refer to --> [ Seat Bench, Wagon ] Seat Bench, Wagon.

- On the bottom side of the bench seat, disengage the profile - 3 - from the cover - 2 - all around the seat frame - 1 - in the - direction of arrow -.

- Cut through all upholstery clips - arrows - all around bottom side of bench seat with suitable pliers.





- The cover - 4 - up on the sides.

- Cut through all the upholstery clips - 5 - with pliers and remove the cover - 4 - from the upholstery - 3 -.

- Then the upholstery - 4 - and the cover - 2 - can be removed from the seat frame - 1 -.





Installing

To install, perform the steps used for removal in reverse order.

Upholstery Clip Pliers (V.A.G. 1634) are required to install new upholstery clips.