Lower A-Pillar Trim, Driver Side

Pillar and Side Trim

Lower A-Pillar Trim, Driver Side

Removing

- Disengage sill panel trim from body in lower A-pillar trim transition area. Refer to --> [ Sill Panel Trim ] Service and Repair.

- Remove side instrument panel covers. Refer to --> [ Side Instrument Panel Covers ] Removal and Replacement.

- Remove center A-pillar trim. Refer to --> [ Center A-Pillar Trim ].

- Remove the hood release handle - 1 -.

- Remove clip - 2 -.

- Remove trim from body - arrow A -.

- Remove trim from door seal piping.

- Pull trim out of mount - arrow B -.

• Before installation, clip - 2 - must be checked for damage and replaced if necessary.





Installing

To install, perform the steps used for removal in reverse order.