Radiator Grille Assembly Overview

Moldings and Trim

--> [ Radiator Grille Assembly Overview ]

Radiator Grille Assembly Overview





1 Radiator Grille

2 Screw

• Qty. 4

• 2 Nm

3 Emblem

• Clipped into radiator grille.

• Removing: Disengage catch on rear side of manufacturer's emblem when radiator grille has been removed and remove by rotating in opposite direction - arrow c -.

• Installing: Guide manufacturer's emblem with catch into recesses in radiator grille - arrow b -, then twist slightly in direction - arrow c - until manufacturer's emblem engages in radiator grille.