Hood Locking and Unlocking Component Overview

Hood

Hood Locking and Unlocking Component Overview





1 Catch

• To remove, unscrew bolts - 2 -

• To adjust catches in their elongated holes, slide toward left or right

2 Bolts

• Qty. 3

• 10 Nm

3 Spreader Nut

• Qty. 2

4 Mounting Bracket

5 Release

• Clipped into mounting bracket

6 Screw

• Qty. 2

• 1.5 Nm

7 Operating Lever

• Removing and installing, refer to --> [ Operating Lever ] Operating Lever

8 Release

• Clipped in on wheel housing and lock carrier

9 Release Coupling

• Disconnecting release, refer to --> [ Disconnecting Hood Release Cable ] Disconnecting Hood Release Cable

10 Hood Lock

• Removing and installing, refer to --> [ Hood Lock ] Hood Lock

• Adjusting