Sound System
Sound System
• The replacement part number is printed on a sticker on the unit housing. Always confirm proper application.
• Before removing radio unit, obtain anti-theft security code from customer. If unit is replaced, ensure anti-theft security code is activated (see owner's manual) or => [ Sound System Electronic Anti-Theft System ] Sound System Electronic Anti-Theft System. Give new code number to customer.
Special tools, testers and auxiliary items required
• Trim removal wedge (3409)
Removing
CAUTION!
• Switch off all electrical consumers.
• Switch ignition off and remove ignition key.
• Remove any CDs which may have been left in CD player => Owner's Manual.
- Remove center instrument panel trim with air outlets so that radio panel screws are accessible,.
- Remove screws - arrows -.
- Use trim removal wedge (3409) to carefully pry out center instrument panel trim in area of - arrows - and remove.
- Remove screws - arrows -.
- Pull radio unit from opening until electrical connections on rear of unit are accessible.
- Disengage electrical connection lock - arrows -.
- Rotate mounting bracket up - arrow - and disconnect electrical connection.
- Disengage antenna cable electrical connection lock - arrow - and disconnect.
Installing
- Reconnect electrical/antenna connections and lock into position.
CAUTION!
In the event of a collision where occupants may make contact with interior trim, some interior knobs and buttons are designed to break away in a controlled manner in order to protect the occupant. When installing the radio unit, do not press on control buttons or display. Damage will result.
- Slide unit straight into instrument panel opening until it engages in assembly frame.
- Install screws - arrows -.
- Reinstall center instrument panel trim.
- If necessary, deactivate anti-theft coding, => [ Sound System Electronic Anti-Theft System ] Sound System Electronic Anti-Theft System.
- Check radio coding, recode if necessary.
Radio unit, coding, => [ Sound System Components, Adapting ] Sound System Components, Adapting