Computers and Control Systems: Description and Operation: Description and Operation

Description and Operation

=> [ Electronic Engine Power Control ] Electronic Engine Power Control

=> [ Fuel Injection System ] Fuel Injection System

=> [ Engine Control Module ] Description and Operation

=> [ Exhaust System Components ] Description and Operation

=> [ Automatic Transmission ]

Check for technical bulletins that may supersede any information included in this information.

Observe all safety precautions: => [ Safety Precautions ] Safety Precautions

View clean working conditions: => [ Clean Working Conditions ] Clean Working Conditions

• All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through the manufacturer.

• Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.