Battery

Battery

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1331)


Risk of injury. Follow all Warnings and Safety Precautions. Refer to => [ Battery Warnings and Safety Precautions ] Battery Warnings and Safety Precautions.

Removal

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the battery case wall in - direction of arrow -.






- Remove the bolt - 1 - and the clamping plate - 2 -.






- Fold up the handles - arrows - and remove the battery.






Installation


If the Battery is not secured properly, the following risks are possible:

• Shortened battery service life due to vibration damage (explosion hazard).

• If the battery is not secured properly, the plates inside the battery can get damaged.

• Damage to battery casing caused by clamping plate (possible electrolyte leakage, high subsequent costs).

• Inadequate crash safety.

Installation is performed in the reverse order of removal. Note the following:

- Tighten the threaded connections to the tightening specification. Refer to => [ Battery Overview ] Battery Overview.

- Make sure the battery is secure after installing it.

- Connect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.


When disconnecting and connecting the Battery, the procedure must be followed as described in the repair information. Refer to=> [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.