Rear Suspension

Left Rear Level Control System Sensor

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1410)

Removing

- Disconnect the connector - 1 -.





- Remove the bolts - 2 - from the lower transverse link.

- Remove bolts - arrows - from the subframe.

- Remove Left Rear Level Control System Sensor (G76).

Installing

Installation is performed in the reverse order of removal. Observe the following when doing so:

The left rear level control system sensor lever must point toward the outside of the vehicle.

- After replacing, perform a headlamp basic setting.

Tightening Specifications