Diagram 143/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver Seat Belt Switch, Front Passenger Seat Belt Switch, Rear Side Airbag Crash Sensor (on Driver side), Rear Side Airbag Crash Sensor (on front Passenger side), Airbag Control Module, Driver Seat Belt Tensioner Igniter 1, Front Passenger Seat Belt Tensioner Igniter 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver Seat Belt Switch

E25 - Front Passenger Seat Belt Switch

G256 - Rear Side Airbag Crash Sensor (on Driver side) Locations

G257 - Rear Side Airbag Crash Sensor (on front Passenger side) Locations

J234 - Airbag Control Module Locations Locations

J519 - Vehicle Electrical System Control Module Locations Locations

N153 - Driver Seat Belt Tensioner Igniter 1 Locations

N154 - Front Passenger Seat Belt Tensioner Igniter 1 Locations

T2j - Double Connector, yellow, in front footwell, left

T2k - Double Connector, yellow, in front footwell, right

T2aa - Double Connector, yellow, below driver's seat

T2ab - Double Connector, yellow, below front passenger's seat

T2an - Double Connector

T2av - Double Connector

T75 - 75-Pin Connector, at J234

(109) - Ground Connection (in airbag wiring harness)

Previous Diagram 143/5 (Tracks 43-56)

Next Diagram 143/7 (Tracks 71-84)