Sill Panel Trim

Sill Panel Trim

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Remove side upholstery:

• with rear side airbags, refer to => [ Side Upholstery with Side Airbag ] Side Upholstery with Side Airbag.

• without rear side airbags, refer to => [ Side Upholstery without Side Airbag ] Side Upholstery without Side Airbag.

Sedan

- Remove wheel housing trim. Refer to => [ Wheel Housing Trim ] Wheel Housing Trim.

Wagon

- Remove wheel housing trim. Refer to => [ Wheel Housing Trim ] Wheel Housing Trim.

All Vehicles

- Pull sill panel trim out of front sill panel and door seal piping.

- Remove guide - 1 - from lower B-pillar trim.

- Pull sill panel trim out of rear sill panel and door seal piping.

- Remove guide - 2 - from lower B-pillar trim.

- Open strap - 3 - and feed seat belt through it.

• Before installing, check securing clips for damage and replace if necessary.





Installation

To install, perform the steps used for removal in reverse order.