Rear Interior Lamp (W43) Bulb

Rear Interior Lamp (W43) Bulb

• If one of the rear interior lamp bulb must be replaced, the anti-theft alarm system must be deactivated. Refer to => [ Anti-Theft Alarm System, Activating/Deactivating ] Anti-Theft Alarm System, Activating/Deactivating (through MY 09).

• The Anti-Theft Alarm System Ultrasound Sensor (G209) must not be moved from its pre-set position (through MY 2009).

Removal

- Remove the entire trim piece- 1 - (lens and reflector) vertically downward from the rear interior lamp.






- Remove the bulb - 1 - from the bulb socket - arrows -.






Bulbs: glass base bulb 12 V/5 W


• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Installation

Install in reverse order of removal.