Brake Pad Thickness, Rear Drum Brake, Checking

Brake Pad Thickness and Front and Rear Brake Rotor Condition, Checking

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1332)






• Flashlight and mirror

Perform the following:

The adapter to loosen/tighten the anti-theft wheel bolts is located in the vehicle tool kit.

Brake Pad Thickness, Rear Drum Brake, Checking

- Remove the plug - 1 -.






- Check the brake pad thickness on the drum brake - a - without the backing plate by looking through the check hole - 2 -. Use a flashlight to make it easier to see the brake pad.






• Wear limit: 2.5 mm

- Make sure there is no brake fluid or grease on the brake pads.

• At a thickness of 2.5 mm, brake pads have reached their wear limit and should be replaced (repair measure). Inform the customer!

Procedure

- Install the plug - 1 - when the check is completed.