Connecting Brake Lines from Master Cylinder to Hydraulic Unit

Connecting Brake Lines from Master Cylinder to Hydraulic Unit

On Master Cylinder:





A Primary piston circuit of master brake cylinder to hydraulic unit.
Identification: diameter 6.5 mm and tube fitting with thread M 12 x 1.
B Secondary piston circuit of master brake cylinder to hydraulic unit.
Identification: diameter 6.5 mm and tube fitting with thread M 12 x 1.
1 Hydraulic unit to front left brake caliper.
3 Hydraulic control unit to rear right brake caliper.
4 Hydraulic control unit to rear left brake caliper.

On Hydraulic Unit:





A Hydraulic unit to primary piston circuit of master brake cylinder.
Identification: diameter 6.5 mm and tube fitting with thread M 12 x 1.
B Hydraulic unit to master cylinder secondary piston circuit.
Identification: diameter 6.5 mm and tube fitting with thread M 12 x 1.
1 Hydraulic unit to front left brake caliper.
Identification: diameter 5.25 mm and tube fitting with thread M 10 x 1.
2 Hydraulic unit to front right brake caliper.
Identification: diameter 5.25 mm and tube fitting with thread M 12 x 1.
3 Hydraulic control unit to rear right brake caliper.
Identification: diameter 5.25 mm and tube fitting with thread M 10 x 1.
4 Hydraulic control unit to rear left brake caliper.
Identification: diameter 5.25 mm and tube fitting with thread M 12 x 1.