Muffler: Service and Repair

Center And Rear Mufflers, Separating (GTI, Eos)

NOTE:
- A separating point has been provided in the connecting pipe for individual replacement of the center or rear muffler.
- The separating point is marked by depressions around the circumference of the exhaust pipe.

Special tools, testers and auxiliary items required
- Chain Pipe Cutter VAS 6254

or

- Body Repair Saw V.A.G 1523A

CAUTION: To prevent injuries from metal shavings, wear protective goggles and protective clothing.







- Separate exhaust pipe at separating point - arrow 2 - using chain pipe cutter VAS 6254 or body repair saw V.A.G 1523A.
- Position clamping sleeve - 4 - at the side markings arrows -1 - and - 3 - - when installing.







- Install clamping sleeve so that bolt end does not project beyond lower edge of clamping sleeve - arrow -.

- Threaded connection points to the rear

- Install exhaust system free of stress.

Tightening Specifications

Component Nm
Clamping sleeve 25 Nm