Crankshaft Sensor Wheel

Sensor Wheel
- Remove engine.
- Remove crankshaft sealing flange.
- Remove upper section of the oil pan.
- Remove balance shaft timing chain.
- Remove connecting rod bearing cover.
- Remove crankshaft bearing cover.
- Remove crankshaft and then remove the sensor wheel.





- Always replace sensor wheel - 2 - whenever screws - 1 - are removed.

Note:
^ After tightening a second time, the attachment point of the countersunk screws of the sensor wheel are so deformed that the screw heads lie on the crankshaft - 3 - - arrows - and the sensor wheel is loose underneath the screws.
^ Installation of sensor wheel is only possible in one position - the bores are offset.