Roof Edge Spoiler Assembly Overview, GTI and R32

Roof Edge Spoiler Assembly Overview, GTI and R32





1 Tailgate

2 Primer surface

• For adhesive bead on retaining strip.

• Position of primer surface should be transferred from adhesive bead depression to retaining strip.

3 Primer surface

• For adhesive bead on roof edge spoiler.

• Position of primer surface is to be transferred from roof edge spoiler.

4 Retaining strip

• With recess for adhesive bead, bead diameter: width = 6 mm, height = 10 mm.

• Removing and installation => [ Roof Edge Spoiler, GTI and R32 ] Roof Edge Spoiler, GTI and R32

• Installation Information => [ Installation Information ] Installation Information

5 Foam band

• Self-adhesive

• Foam band should be checked for damage and replaced if necessary before installing roof edge spoiler.

6 Adhesive tape

• Two strips for securing sides of roof edge spoiler.

7 Adhesive surface

• Is marked in interior side of roof edge spoiler.

8 Roof edge spoiler

• Material PC/PET

• Removing and installing => [ Roof Edge Spoiler, GTI and R32 ] Roof Edge Spoiler, GTI and R32

• Installation Information => [ Installation Information ] Installation Information