Stabilizer Bar Assembly Overview

Stabilizer Bar Assembly Overview






1 Stabilizer Bar

• Be aware of the various suspension versions. Refer to => [ Vehicle Data Label ] Application and ID.

• Removing and installing, refer to => [ Stabilizer Bar ] Stabilizer Bar.

2 Rubber Mount

• Replace mounts always on both sides of vehicle.

3 Clamp

4 Bolt

• 25 Nm + 90° turn

• Tighten uniformly.

• Always replace if removed.

• Always tighten threaded connections in curb weight position. Refer to => [ Wheel Bearing, Lifting to Curb Weight Position ] Procedures.

5 Wheel Bearing Housing

6 Nut

• 45 Nm

• Self-locking

• Always replace if removed.

• Counterhold at connecting link socket head when tightening => [ (Item 8) Coupling Rod ].

7 Bolt

8 Coupling Rod

• Connects stabilizer to trailing link/wheel bearing housing.

9 Nut

• 45 Nm

• Self-locking

• Always replace if removed.

• Counterhold at socket head of bolt when tightening => [ (Item 7) Bolt ].

10 Subframe