Bonding The Sensor Bracket In The Event Of Repairs

Bonding The Sensor Bracket In The Event Of Repairs

If a bumper cover is repaired or a new bumper cover is installed, the parking aid sensor brackets must be glued into the marked adhesive areas provided for them on the inside of the bumper cover. Before bonding, the sensor brackets and sensors must be painted separately in the color of the bumper cover. The following requirements must be observed when painting the sensor brackets and the sensors in order to ensure full functionality of the parking aid system. Preparation of the adhesive contact surface and the adhesive process are to be performed while observing the following process steps. Use the corresponding repair set.

• Note the installation instructions included with the sensor repair set.