Rear Seat Belts

Rear Seat Belts

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Remove the seat bench. Refer to => [ Bench Seat ] Bench Seat

- Remove headrest cover. Refer to => [ Headrest Cover ] Headrest Cover.

- Remove the backrest. Refer to => [ Backrest ] Backrest

- Remove side trim. Refer to => [ Side Trim ] Side Trim

- Remove rollover protection trim. Refer to => [ Rollover Protection Trim ] Rollover Protection Trim

- Remove rollover protection trim support piece. Refer to => [ Rollover Protection Support Trim ] Rollover Protection Support Trim

- Remove rear seat belt anchors. Refer to => [ Rear Seat Belt Anchors ] Rear Seat Belt Anchors

- Press belt guide - 1 - in upper area out of catch - arrow A -.

- Press belt guide down diagonally out of catch - B arrow -.

- Remove bolt - 2 - (40 Nm).

- Remove belt inertia reel - 3 - from mount in body.

- Thread seat belt with belt guide - 1 -, seat belt latching tongue and belt anchor through belt relay - 4 -.






Installation

- Install in reverse order of removal.