Front Seat Belt Latches

Front Seat Belt Latches

• The following describes removing and installing the seat belt latch on the left seat. Removing and installing the right seat belt latch is identical.

Removing

- Remove the front seat. Refer to => [ Front Seat ] Front Seat

- Position seat as far forward as possible.

- Remove cover cap - 1 - from seat rail on tunnel side.






- If present, disconnect wiring harness from seat frame.

- Remove bolt - 1 - (20 Nm).

• The screw is micro-encapsulated and must be replaced every time it is loosened.

• Before new bolts are installed, the thread of the corresponding nut must be cleaned.

- Remove the seat belt latch - 2 - from the mount in the seat rail - arrow -.






Installation

- Install in reverse order of removal.