Illuminated Vanity Mirror Lamps
Illuminated Vanity Mirror Lamps
Special tools, testers and auxiliary items required
• Trim Removal Wedge (VAS 3409)
• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned, using commercially available adhesive tape.
• Removal and installation for both lights is performed in the same way and is only described for one light.
Removal
- Turn off the ignition and all electrical consumers.
- Carefully pry light out of trim at lower roof cross member using (VAS 3409) or a screwdriver.
- Disconnect electrical connection - arrow -.
Bulb, Replacing
- Push contact plate - 1 - of light in - direction of arrow - and remove the tubular bulb - 2 - from socket.
- Replace the tubular bulb (12V, 5 W).
Installation
Installation is performed in the reverse order of removal.