Heater and A/C Unit

Heater and A/C Unit






1 Bracket

2 Screws

• Bolts must be unscrewed to separate air distributor and evaporator housing.

3 Cover

4 Fresh/Recirculating Air Door Motor (V154)

• Checking: use Vehicle Diagnosis, Testing and Information System (VAS 5051B).

• Removing and installing, refer to => [ Fresh/Recirculating Air Door Motor (V154) ] Fresh/Recirculating Air Door Motor (V154).

5 Housing For Air Entry

• With air recirculation door.

• Removing and installing, refer to => [ Air Intake Housing ] Air Intake Housing.

6 Upper Section Of Evaporator Housing

• Disassembling and assembling evaporator housing, refer to=> [ Evaporator Housing ] Evaporator Housing.

7 Lower Section Of Evaporator Housing

• Disassembling and assembling evaporator housing, refer to=> [ Evaporator Housing ] Evaporator Housing.

8 Fresh Air Blower Series Resistor With Fuse (N24)

• Removing and installing, refer to => [ Fresh Air Blower Series Resistor with Fuse (N24) ] Service and Repair.

9 Fresh Air Blower (V2)

• Removing and installing, refer to => [ Fresh Air Blower (V2) ] Service and Repair.

10 Dust and Pollen Filter

• Removing and installing, refer to => [ Dust and Pollen Filter ] Service and Repair.

11 Cover

• For dust and pollen filter.

12 Heater Core

• Removing and installing, refer to => [ Heater Core ] Service and Repair.

13 Heater Core Trim

14 Auxiliary Heater Heating Element (Z35)

• Only installed on vehicles with Diesel engine.

15 Flexible Shaft For The Air Distribution Door

• Removing and installing, refer to => [ Flexible Shaft, Through 18 May 2008 ] .

16 Junction Box

17 Flexible Shaft For The Temperature Door

• Removing and installing, refer to => [ Flexible Shaft, Through 18 May 2008 ] .