Glove Compartment

Glove Compartment

Removing

- Switch off ignition.

- Remove side instrument panel cover on passenger side Refer to => [ Instrument Panel Side Covers ] Instrument Panel Side Covers

- Remove center A-pillar trim on passenger side Refer to => [ Center A-pillar Trim ] Center A-pillar Trim

- Remove passenger side A-pillar trim Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim

- Remove center cover Refer to => [ Center Cover ] Center Cover

- Remove 7 bolts - 1 -, - 2 -, and - 3 - (1.5 Nm).

- Slide glove compartment outward until stops - arrow A -.

- Disengage glove compartment from instrument panel - arrow B -.

- Disconnect wiring harness from lights and contact switch.

- In vehicles with front passenger airbag shut-off, disconnect wiring harness from key switch.

- In vehicles with glove compartment cooling, disconnect A/C channel from glove compartment.

- In vehicles with footwell lights, disconnect wiring harness from lights.






Installation

- Install in reverse order of removal.