Intake Air Grille

Intake Air Grille

Removal

- Remove the plenum chamber cover.

- Remove the cover - 1 - from the plenum chamber.






• Beginning 25 May 2008, vehicles with Climatronic have a bracket with an Air quality sensor (G238) installed on the intake air grille.

• Air quality sensor function, refer to=> [ Air Quality Sensor ] Air Quality Sensor.

- Turn the air quality sensor - 1 - to the right and remove it.






- Remove the flange nuts - arrows - (2.5 +/- 0.4 Nm) and the intake air grille.






Installation

Install in reverse order of removal.

• The seal must fit correctly in the intake air grille.

Assembly sequence:

- Align the air grille on the flange.

- Hold the intake air grille and install the side flange nuts (2.5 +/- 0.4 Nm) and then the center flange nut.