Radio Tuner: Service and Repair

Digital Satellite Radio Tuner (R190)

Removal

Do the following before starting the procedure:

- Turn off the ignition and all electric consumers and remove the key.

- Slide right front seat into the rearmost position.

- Unclip cover in - direction of arrow - at bottom of seat.






- Remove the three bolts - arrows - on radio tuner.






- Disconnect harness connectors - A and B - on digital satellite radio tuner, to do so press locking mechanisms - arrows - and then disconnect the connectors.

- Disconnect antenna wires - C - on tuner, to do so press locking mechanisms - arrows - and then disconnect the connectors.






- Remove digital satellite radio tuner.

Installation

Installation is performed in the reverse order of removal.