Engine Mount: Service and Repair

Engine, Securing to the Engine and Transmission Holder (VAS 6095)

Special tools, testers and auxiliary items required

• Engine and Transmission Holder (VAS 6095)

• Lifting Tackle (3033)

• Shop Crane - Load Cap = 700-1200 KG (VAS 6100)

• Engine-/Gearbox Jack (V.A.G 1383 A)

• Engine Support (3269)

Secure the engine to the engine and transmission holder (VAS 6095) when working on it.

Procedure

- Remove the transmission from the engine.

- After separating the engine from the transmission, secure the torque converter to prevent it from "falling out".

- Install the lifting tackle (3033) and lift the engine using the shop crane - load cap = 700-1200 KG (VAS 6100) from the engine-/gearbox jack (V.A.G 1383 A).






Vibration damper side: Position 3.

Flywheel side: Position 11.

Using the Engine and Transmission Holder (VAS 6095) with Universal Mounts






- Secure the engine to the engine and transmission holder (VAS 6095) as shown.

Using the Engine Support (3269)






- Secure the engine support (3269) to the cylinder block as shown.