Engine Code CNNA

Accessory Bracket

Removing

- Remove the ribbed belt. Refer to => [ Ribbed Belt ] Ribbed Belt.

- Remove the generator.

- Remove the Air Conditioning (A/C) compressor.

- Remove the accessory bracket bolts and bracket.

Installing






- Position the accessory bracket to the cylinder block.

- First, install the bolts - 2 and 4 - hand tight.

- Then, install the bolts - 1, 3 and 5 - hand tight.

- Now, tighten all the bolts to 23 Nm in a diagonal sequence.

Further installation is in the reverse order of removal.