Transmission Fluid, Draining and Filling

Transmission Fluid, Draining and Filling

- Turn off the engine.

- Remove the plug from the oil pan - arrow -.






- Remove the overflow tube - C -.






- Always replace the seal - B -.

- Drain the transmission fluid.

- Install the overflow tube - C -. Refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

- Install adapter for oil filling (VAS 6262/2) hand-tight.






- Shake the bottles before opening.

- Read the information regarding the pipe before attaching the adapter for oil filling (VAS 6262 A) to the fluid container. Refer to => [ Shortening the pipe on the : ] Transmission Fluid Level, Checking and Filling.

- Fill with 3 liters of fluid through the filler tube. Refer to the Parts Catalog.

- Install and tighten the plug - A - with a new seal - B - by hand.






- Start the engine, shift through all selector lever positions, you must remain shifted in each position approximately 10 seconds.

- Check the fluid level and add if necessary. Refer to => [ Transmission Fluid Level, Checking and Filling ] Transmission Fluid Level, Checking and Filling.