After an Accident with Belt Tensioner and/or Airbag Deployment

After an Accident with Belt Tensioner and/or Airbag Deployment

• The passenger occupant detection system control module (J706) must be used to restore the basic setting whenever a passenger airbag and/or seatbelt tensioner has been deployed. To restore the basic setting, use a Vehicle Diagnosis Tester that is also able to run "Guided Fault Finding".

• If the seat rail and/or the seat pan has to be replaced because it is deformed after an accident, then the "repair kit for the passenger occupant detection system" must be used for replacing the passenger occupant detection system. Afterward, the passenger occupant detection system (J706) must be used to restore the basic setting. To restore the basic setting, use a Vehicle Diagnosis Tester that is also able to run "Guided Fault Finding".