License Plate Holder

License Plate Holder

Removing






- Remove clips - 2 - and remove license plate holder - 1 - from the radiator grille.

Installation






With holes present

- Position license plate holder - 1 - on the radiator grille and press clips - 2 - in.

With no holes present

• On vehicles with front parking assist, a depth dimension of 12 mm must be maintained when boring holes.

• The parking assist wiring harness is routed at the height of the upper bore holes on the bumper carrier.

- Center license plate holder - 1 - on the radiator grille with respect to emblem - 3 -.

- Set the drill stop depth to 12 mm and drill the holes.

- Position license plate holder - 1 - on the radiator grille and press clips - 2 - in.